we discuss UAV technology on the foremost widespread RC on the shop that have all the most recent drone advanced. Most Drones can have terribly similar systems incorporated. Remote-controlled aerial vehicle technology covers everything from the aeromechanics of the Drones, materials within the manufacture of the physical UAV, to the circuit boards, chipset and code that square measure the brains of the drone. One of the most popular drones on the market is the DJI Phantom 3. This drone was very popular with skilled aerial cinematographers.
Check the hose clips for tightness and examine the trunking for any cracks or splits and furthermore every the vacuum system, the small bore pipes and fittings for cracks and missing parts. The best habit to locate a leak is to have the engine supervision and warm and later spray lighter gas /propane or brake cleaner on the subject of each joint in turn. If the engine rev s up you ve found your leak.
Thanks for your response. I just checked what you mentioned, that I hadn't already checked, except fuel pressure.Let me tell you a little more roughly the pain history. It currently has a master tech official idle air govern valve and tps installed. without disturbing anything, the last (used) ecu and my original, would direct in the car without this symptom.
This could be a large vacuum leak ,with the MAF related it is abandoned measuring the ventilate that is getting similar to the MAF, so if the intake manifold is sucking in freshen the let breathe to fuel ratio will be entirely out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. taking into consideration carb cleaner spray can spray in the place of the hissing in imitation of the engine doling out and considering you hear the engine stall or rev forward-thinking there is the leak ,could be a bad vacuum hose bad gasket on the manifold.