we discuss UAV technology on the foremost standard RC on the market that have all newest drone technology. Most RC can have terribly similar systems incorporated. Unmanned aerial vehicle technology covers everything from the aeromechanics of the RC, materials within the manufacture of the physical UAV, to the circuit boards, chipset and software system that area unit the brains of the drone. One of the most popular drones on the shop is the DJI Phantom 3. This drone was very fashionable with professional aerial cinematographers.
Check the hose clips for tightness and inspect the trunking for any cracks or splits and plus every the vacuum system, the small bore pipes and fittings for cracks and missing parts. The best mannerism to find a leak is to have the engine management and hot and subsequently vaporizer lighter gas /propane or brake cleaner in this area each joint in turn. If the engine rev s stirring you ve found your leak.
Might also be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can do a quick idiosyncrasy find if you unplug the meter and run the engine without it. if the engine condition is the similar later chances are the meter or the connection to it is faulty. Its next worth cleaning the MAF sensor wires, as they can acquire coated similar to dirt greater than get older which next offsets the reading. Use some gate cleaner or brake cleaner to vaporizer onto the wires to separate the dirt upon no account lie alongside the wires in imitation of all as they are definitely fragile
I'm reviewing your ask now, and will broadcast support with your answer ASAP. Rgds Greg. What deviation codes reach you have. Does the engine run afterward the MAF disconnected. in the same way as the noisy hissing sealed this could be your problem. This could be a large vacuum leak ,with the MAF connected it is only measuring the expose that is getting afterward the MAF, consequently if the intake manifold is sucking in let breathe the let breathe to fuel ratio will be entirely out and cause the engine to stal