we talk about UAV technology on the foremost common RC on the shop that have all the most recent drone advanced. Most Drones can have terribly similar systems incorporated. Remote-controlled aerial vehicle technology covers everything from the mechanics of the RC, materials within the manufacture of the physical UAV, to the circuit boards, chipset and software package that area unit the brains of the drone. One of the most popular drones on the shop is the DJI Phantom 3. This drone was very popular with skilled aerial cinematographers.
Hello, I have repaired exceeding 30000 vehicles in my career and I infatuation to ask you questions previously I am not there in person to hoard facts, data, or to test your vehicle. I may question you to affect psychoanalysis in my stead. If laboratory analysis is needed and you would rather not produce a result testing, I can come up with the money for my best advice, Fuel pressure?
Might plus be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can complete a fast oddity find if you unplug the meter and run the engine without it. if the engine condition is the same then chances are the meter or the attachment to it is faulty. Its then worth cleaning the MAF sensor wires, as they can get coated with dirt greater than period which then offsets the reading. Use some right to use cleaner or brake cleaner to vaporizer onto the wires to remove the dirt on no account be adjacent to the wires in imitation of whatever as they are enormously fragile
This could be a large vacuum leak ,with the MAF joined it is and no-one else measuring the freshen that is getting gone the MAF, for that reason if the intake manifold is sucking in freshen the freshen to fuel ratio will be unconditionally out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. as soon as carb cleaner spray can vaporizer in the area of the hissing later the engine organization and taking into account you listen the engine stall or rev difficult there is the leak ,could be a bad vacuum hose bad gasket upon the manifold.